Partial Discharge Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: KDJF-800A
• Customized Support: OEM, ODM, Obm, Software Reengineering
• Headphone: 8 Ohms Minimum
• Charger: AC 90-264V or DC 5V
• Built in Battery: 3.7V/5000mAh Lithium Battery
• Using Temperature: -20 ~ 50ºC
• Humidity: 20-85% Relative Humidity
• Power: Electronic
• Volume and Weight: 210*100*35(mm) 0.4kg(Host)
• SD Card: Standard 16g ~ 64G
• Working Tiome: About 6 Hours
• Transport Package: Outside Packing: Standard Wooden Box
• Trademark: KDZD
• Origin: Hubei, China
• HS Code: 9030332000
• Production Capacity: 500 Set/Sets Per Month

Product Description

Products Introduce

This product can be widely used in partial discharge detection of power system, including insulation state detection of high-voltage switchgear, ring network cabinet, voltage/current transformer, transformer (including dry-type transformer), GIS, overhead lines, cables and other equipment.

The discharge degree of electrical and gas equipment is measured by the following indicators:

 
Partial discharge intensity detection: measure the discharge signal within one power frequency cycle, and characterize the partial discharge intensity according to the maximum value (dB) in the discharge pulse sequence.

Partial discharge frequency detection: measure the discharge signal within one power frequency cycle, extract the discharge pulse and characterize the frequency of partial discharge according to the number of discharge pulses.
 

TEV measure
measuring range	0-60 dBmV
resolving power	1dB
accuracy	±1dB
Maximum pulse per cycle	1400
Measurement frequency band	3-100MHz
UHF measurement
UHF measurement and detection frequency band	300-2000MHz
measuring range	0-60 dBmV
accuracy	<1dBmV
Sensor frequency band	300-2000MHz
AA measurement
measuring range	-6dBμV~68dBμV
resolving power	1dB
accuracy	±1dB
Sensor center frequency	40 kHz
AE measurement
measuring range	-6dBμV 68dBμV
resolving power	1dB
accuracy	±1dB
Frequency range	20~200 kHz
HFCT measure
Sensor transmission impedance	5mV/mA
Detection frequency	1~30MHz
sensitivity	≤50pC
Hard ware
Housing	ABS
display	4.0 inch RGB LCD display resolution: 800* 480
connector	USB interface (also charger input)
	3.5mm stereo headphone jack
	external sensor input interface
headphone	8 ohms minimum
SD card	standard 16G ~ 64G
built in battery	3.7V/5000mAh lithium battery
working tiome	about 6 hours
charger	AC 90-264V or DC 5V
using temperature	-20 ~ 50ºC
humidity	20-85% relative humidity
volume and weight	210*100*35(mm) 0.4KG(host)

Product characteristics

Configure different sensors to realize partial discharge detection of almost all electrical equipment; The
humanized man-machine interface facilitates the data management of different equipment;
Built in ultrasonic sensor and transient earth voltage (hereinafter referred to as TEV) sensor, which can be externally connected to transformers, GIS, overhead lines, cables and other special sensors;
Non intrusive detection mode is adopted, so there is no need to cut off power and configure additional high-voltage source duringthe test, which is more convenient than the traditional pulse type partial discharge detector;
The test bandwidth range is 30kHz~2.0GHz, applicable to the detection principle of various frequency bands;

Product application field

 

Power generation and distribution enterprises

Railway system

Petrochemical power supply system
Aerospace inspection field

Automatic detection field