Electrical Boots Inspection Dielectric Testing Insulated Glove High Voltage Tester

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: KDZD
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Kdzd
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Needle
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Selling Units: Single Item
• Ower: Tbd
• Output Voltage of Control Box: 0-250V
• Place of Origin: Hubei, China
• Rated Output Voltage: 50kv
• Customized Support: Oemodmobm
• Brand Name: Kdzd
• Single Gross Weight: 8.000kg
• Power Input Voltage: 220V+10%50Hz
• Voltage: Other
• Single Package Size: 34X23X12.Cm
• Output Current of Control Box: 25A
• Transport Package: Box
• Specification: 50*50*50
• Trademark: KDZD
• Origin: China
• Package Size: 50.00cm * 50.00cm * 50.00cm
• Package Gross Weight: 25.000kg

Product Description

Product Description

1. Rated capacity	3kVA
2. Input voltage	AC220V ± 10% 50Hz ± 1
3. Output voltage	AC 0-30kV
4. Voltage accuracy	≤ 2.0% (F.S)
5. Low voltage current	0-15A
6. Leakage current	0-20.0mA
7. Leakage current resolution	0.1mA
8. Current accuracy	≤ 1.5% (F.S)
9. Timing range	0-999S
10. Ambient temperature	- 20 to 50

Main Features

--------------------

Automatic release type insulated boots (gloves) Pressure support (shown) an instruction manual catalogue 1 Overview 4 2 Main technical indicators 4 3 Measurement range of the test object 4 4 Functional Features 4 5 Instrument Working Principle Diagram 5 6 Schematic diagram of insulated shoe (insulated glove) pressure support 5 7 Operation step 5 Attached Table: Electrical Performance Requirements for Electrical Insulated All Rubber Rubber Shoes and Electrical Insulated All Polymer Material Shoes (GB12011-2009) 6 Attached Table: Electrical Insulation Performance Requirements for Insulated Gloves (GB17622-2008) 6 8 Operating Instructions for Insulating Shoe and Glove Test Stand 8 9 High voltage leakage current release mechanism 8 10 Battery Maintenance 8 11 Charging instructions 8 12 Instrument Calibration 8 14 Test method for insulating gloves 9 15 Common faults and their troubleshooting 9 16 Warranty Clause 10 Special tips and precautions 1. This instrument belongs to a high-voltage instrument. Please read the manual carefully and conduct the test under the guidance of personnel with high-voltage knowledge present. 2. Do not conduct a test on the insulated shoe and glove pressure support during charging, as this will introduce high voltage into the support and cause equipment to ground breakdown. 3. During the insulation boot and glove test, do not pour water into the voltage regulating control box to avoid damaging the components inside the testing machine. 4. The output high voltage of this device is automatic boosting and automatic reducing. After reducing the voltage, please turn off the power and unplug the plug before replacing the test sample. 5. Use this test bracket to conduct a pressure test. Please arrange safety barriers and set up warning personnel before conducting the test. The pressure regulating operation box is a safe part that can be operated with confidence. 6. Before the experiment, please check whether the instrument ground wire is properly connected to the ground. 7. If there is any malfunction with the instrument, please contact our technical personnel at the contact number listed in the manual. Do not disassemble it without permission. 8. During use, when the battery level inside the insulated shoe and glove pressure stand shows low, it should be stopped and charged in a timely manner to avoid damage to the lithium battery due to excessive discharge. Lithium batteries should be charged once every 1-2 months to extend their lifespan if they are not used for a long time. 1 Overview The automatic release type insulated shoe (glove) withstand voltage bracket is developed based on the requirements for power frequency withstand voltage in relevant regulations such as "DLT 976-2017 Preventive Testing Regulations for Live Working Tools, Devices and Equipment", "DLT 1476-2015 Preventive Testing Regulations for Electric Power Safety Tools and Instruments", "GBT 17622-2008 Insulated Gloves for Live Working", and "CB21148 2020 Foot Protection Safety Shoes". Intelligent insulation and voltage withstand tests can be conducted on safety tools such as insulated shoes and gloves as required. The resistance test cycle for insulated shoes and gloves is six months, and breakdown is not allowed during the test process. At the same time, the leakage current of insulated shoes and gloves should not exceed the limit value. The product is suitable for all industries related to electricity. 2 Main technical indicators Support working power supply DC 12V lithium battery supply

 

 

Certifications

Product packaging

FAQ

1. How is our product? 

    We are manufacturer, so preferential price and high quality can guarantee. 

 

2. How soon to get price?
     Usually provide within 6 hours once receiving inquiry. If you are very urgent, please call us then we will       do in priority. 

 

3. Whal is your terms of delivery?

     EXW,FOB, CFR, CIF, ect. Pls select your most conveient and cost effective. 

 

4. When there is difficulty in using ? 

     We will first provide equipment operation manual, operation video, or provide training through remote         video call. Ifnecessary, engineers will serve on door. 

 

5. What about the leading time for production? 

    That depends on order qty and product item. For normal items, usually within 3 working days. Delivery      time is determined by the logistics , generally is 5-7 days. 

 

6.How to send? 

    For most of our customers, we provide door-to-door service. You only to through import customs                clearance proceduresand pay the import tariff. 

 

7. How is packing and will the goods be damaged? 

     We will pack standard export packing for everyequipment, so far there is no damage yet, pls no worry.

Company Profile

Recommend Products

 

Automated Electric High Voltage Insulating Boots System Insulated Gloves Hipot Integrity Tester Withstand Voltage Test