Insulated Boots and Gloves Withstand Voltage Test Device Bracket Insulated Boots and Gloves Withstand Voltage Tester Bracket

• Customization: Available
• Warranty: 1 Year
• Output Voltage of Control Box: 0-250V
• Rated Output Voltage: 50kv
• Power: Electronic
• Customized Support: OEM, ODM, Obm
• Output Current of Control Box: 25A
• Trademark: KDZD
• Origin: Hubei, China
• HS Code: 9030332000
• Production Capacity: 100

Product Description

Product Description

1. Rated capacity	3kVA
2. Input voltage	AC220V ± 10% 50Hz ± 1
3. Output voltage	AC 0-30kV
4. Voltage accuracy	≤ 2.0% (F.S)
5. Low voltage current	0-15A
6. Leakage current	0-20.0mA
7. Leakage current resolution	0.1mA
8. Current accuracy	≤ 1.5% (F.S)
9. Timing range	0-999S
10. Ambient temperature	- 20 to 50

 

 

 

 

Main Features

--------------------

1. This instrument belongs to a high-voltage instrument. Please read the manual carefully and conduct the test under the guidance of personnel with high-voltage knowledge present.

2. Do not conduct a test on the insulated shoe and glove pressure support during charging, as this will introduce high voltage into the support and cause equipment to ground breakdown.

3. During the insulation boot and glove test, do not pour water into the voltage regulating control box to avoid damaging the components inside the testing machine.

4. The output high voltage of this device is automatic boosting and automatic reducing. After reducing the voltage, please turn off the power and unplug the plug before replacing the test sample.
5. Use this test bracket to conduct a pressure test. Please arrange safety barriers and set up warning personnel before conducting the test. The pressure regulating operation box is a safe part that can be operated with confidence.

6. Before the experiment, please check whether the instrument ground wire is properly connected to the ground.

7. If there is any malfunction with the instrument, please contact our technical personnel at the contact number listed in the manual. Do not disassemble it without permission.

8. During use, when the battery level inside the insulated shoe and glove pressure stand shows low, it should be stopped and charged in a timely manner to avoid damage to the lithium battery due to excessive discharge. Lithium batteries should be charged once every 1-2 months to extend their lifespan if they are not used for a long time. 1 Overview The automatic release type insulated shoe (glove) withstand voltage bracket is developed based on the requirements for power frequency withstand voltage in relevant regulations such as "DLT 976-2017 Preventive Testing Regulations for Live Working Tools, Devices and Equipment", "DLT 1476-2015 Preventive Testing Regulations for Electric Power Safety Tools and Instruments", "GBT 17622-2008 Insulated Gloves for Live Working", and "CB21148 2020 Foot Protection Safety Shoes". Intelligent insulation and voltage withstand tests can be conducted on safety tools such as insulated shoes and gloves as required. The resistance test cycle for insulated shoes and gloves is six months, and breakdown is not allowed during the test process. At the same time, the leakage current of insulated shoes and gloves should not exceed the limit value. The product is suitable for all industries related to electricity.