Impulse Current Generator Tester Surge Protection Test Device

• Customization: Available
• Warranty: 1 Year
• Relative Humidity: 85% (20ºC), No Condensation
• Model NO.: KDCW-20
• Input Power: AC220V/3kVA, 50Hz/60Hz
• Charging Time: 22kv40s~60s
• DC Maximum Charging Voltage: DC22kv, Maximum
• Charging Current: 0.1A
• Customized Support: OEM, ODM
• Temperature Difference: 25ºC
• Ambient Temperature: -5ºC~+40ºC, Maximum Daily
• Use Environment: Indoor
• Power: Electronic
• Residual Voltage Level: ≤2.5kv
• Altitude: 1000m
• Trademark: KDZD
• Origin: Hubei, China
• HS Code: 9030332000

Product Description

 

The KDCW-20 device is designed for the Class II product combination wave test requirements of the SPD in the low-voltage power distribution system. It can generate impulse voltage (1.2/50μs) and impulse current (8/20μs) for the Class III test and limiting voltage test of SPD and components. It can also perform impulse current tests and residual voltage value verification on MOV valves, units and surge protectors (SPD), or be used for other scientific research tests.

The device uses computer and PLC control technology, and its main performance meets the various combination wave test requirements for SPD products and their devices at home and abroad.

Performance parameters of complete equipment
The main technical parameters of the test platform are:
Input power	AC220V/3kVA, 50Hz/60Hz
DC maximum charging voltage	DC22kV, maximum charging current 0.1A
Charging time	22kV40s~60s
Charging voltage setting	test initialization to pre-set and set charging voltage
Residual voltage level	≤2.5kV
Automatic polarity conversion
the number of positive and negative polarity impacts can be set separately. Phase automatic tracking, 0-359° adjustable Action load power AC5-500V/5A, built-in decoupling capacitor, inductor. Manual boost, buck, meter display. Combination wave impulse generator circuit
Capacitance	8uF Charging voltage 25kV
Output capacity	10%~110%, reverse peak<20% (without decoupling load)
Open circuit voltage waveform	T1:1.2±30%, T2:50±10%
Short circuit current waveform	T1:8±10%, T2:20±10% (without decoupling load)
Short circuit current waveform	T1:8±20%, T2:20±20% (with decoupling load)
Output impedance	2 ohms±10%
Test cabinet	400*400*300mm (customized according to customer requirements)
Cabinet size	600*800*1800mm
Weight	about 600 kg
The cabinet is equipped with movable casters and fixed supports, which can be easily moved and positioned;

Applicable conditions
Altitude		1000m
Ambient temperature		-5ºC~+40ºC, maximum daily
temperature difference		25ºC
Relative humidity		85% (20ºC), no condensation
Usage environment		indoors
No conductive dust, no fire and explosion hazards, no corrosive metal and insulating gas
The waveform of the power supply voltage is a sine wave, the waveform distortion rate is < 5%, and the voltage fluctuation is lessthan 10%
The grounding resistance is not more than 0.5Ω

Compliant with standards

GB 18802.1-2012 Surge protectors for low voltage distribution systems - Part 1: Performance requirements and test methods

GB/T 18802.12-2006 Surge protectors for low voltage distribution systems - Part 12: Guidelines for selection and use

GB/T 16927.1-1997 High Voltage Test Techniques Part 1 General Test Requirements

GB/T 16927.2-1997 High Voltage Test Techniques Part 2 Measurement Systems

GB/T 17626.5-1999 Electromagnetic Compatibility - Testing and Measurement Techniques - Surge (Impulse) Immunity Test

IEC61000-4-5 Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test

IEC61643.11: Low voltage surge protectors (SPDs) - Part 11: Performance requirements and test methods for surge protectors used in low voltage power systems

IEC61643-21: Low voltage surge protectors (SPDs) - Part 21: Surge protectors for telecommunications and signal network systems - Performance requirements and test methods