Automatic Sulfur Hexafluoride Tester Calibrator Sf6 Gas Density Relay Calibrator

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: KDJD
• Power: Electronic
• Measuring Range: 0 ~ 1.000MPa
• Measurement Method: Full Automatic Test
• Measurement Accuracy: Better Than Grade 0.2
• Normal Temperature Gas Pressure Gauge: Calibration at Any Pressure Point of 0 ~ 1MPa
• 20 ° Gas Pressure Gauge: Calibration at Any Pressure Point of 0 ~ 1MPa
• Customized Support: OEM, ODM, Obm, Software Reengineering
• Transport Package: Carton or Wooden Case
• Trademark: KDZD
• Origin: Hubei, China
• HS Code: 9030332000

Product Description

 

KDJD-A SF6 density relay tester is an intelligent and automatic SF6 density relay calibration instrument. This instrument adopts single cycle instruction microcomputer technology, with a running speed 10 times faster than ordinary microcontrollers. It can perform on-site verification of SF6 density relays with pointer type contact output and intelligent current output, and use interrupt mode to capture the real-time action of the density relay. Therefore, the instrument measures more accurately and timely.
 
This instrument is a portable calibration device used for standard conversion of pressure under SF6 gas ambient temperature. It can also automatically calibrate SF6 density and pressure gauges.
 

Technical parameter
Measurement method	full automatic test
Measurement accuracy	better than grade 0.2
Measuring range	0 1.000MPa
SF6 density relay	single alarm, single locking, single alarm single locking, single alarm double locking
Normal temperature gas pressure gauge	calibration at any pressure point of 0 ~ 1MPa
20 ° gas pressure gauge	calibration at any pressure point of 0 ~ 1MPa
Pressure detection range	0 ~ 10MPa (0 ~ 1.0000mpa);
Pressure detection resolution	0.0001 MPa
Temperature measurement range	- 40 ~ 120
Temperature measurement error	≤± 0.5
Instrument operating temperature	- 20 ~ + 80
Working principle	automatic pressurization with built-in steel cylinder, without external air source
SF6 gas emission	the SF6 gas emission is very small in the whole calibration process
Verification object	single alarm, single locking, single alarm single locking, single alarm double locking
SF6 gas density display mode	pressure under the measured environment, equivalent pressure at 20
Instrument display mode	industrial grade 8.4 inch super large touch LCD screen, which displays the measured value and the pressure value under the standard temperature on the same screen
Operation mode	all Chinese, all touch operation, simple, intuitive and convenient
Storage capacity	100 groups
Communication interface	RS-232
Printing method	built in micro printer to print test data
PC communication mode	RS232 serial port communication (USB optional)
Working power supply	AC: 220V ± 10% 50Hz
Charging adapter output	DC: 8.4v (with protection)
Power consumption of the whole machine	10W
Instrument weight	10.0kg
Overall dimension	460mm long × Width 380mm × Height 180mm

Product Features
1. Adopting a 32-bit ARM microcontroller and TI's high-speed signal processing chip for detection and control, with a high degree of integration. The relay calibrator adopts an analog-to-digital hybrid single cycle high-speed microcontroller as its core, which has abundant resources, strong data processing capabilities, mechatronics design, high accuracy, good repeatability, high reliability, and high precision.

2. Automatically complete pressure measurement and 20 ºC value conversion, thus achieving dynamic automatic compensation between pressure and temperature. And display the pressure at the tested ambient temperature, the pressure at the ambient temperature of 20 ºC, and the ambient temperature. Thoroughly solved the problem of difficult on-site calibration of SF6 gas density relays.

3. The instrument testing process is automatically completed by the instrument without manual intervention, and can automatically calibrate pointer and electronic density relays.

4. The initial state of the 1-3 sets of contacts of the density relay is normally open or normally closed, and the response and recovery values of the 1-3 sets of contacts can be measured simultaneously. Therefore, this instrument can adapt to the automatic calibration of new and old forms of density relays.

5. The instrument pipeline adopts imported quick connectors, which consume less gas during the calibration process, do not waste SF6 gas, have low testing costs, do not pollute the environment, are easy to connect, and have a low leakage rate.

6. The internal components of the instrument are imported components with reliable performance and clock function, which can correct the clock in real time. High precision pressure sensors and magnetic fluid technology products are used.

7. The instrument is equipped with various imported switch transition connectors, and the density relays of most models of switches can be verified on site without disassembly. Suitable for all transition joints (including currently major imported switches and domestically produced switches).

8. The instrument has a self calibration function. After prolonged use, the instrument can be calibrated and corrected to ensure its calibration accuracy.

9. The instrument can calibrate the normal temperature pressure gauge and density gauge at ambient temperature.

10. Equipped with a high-capacity built-in battery, the screen displays the battery level, expanding the instrument's usage space and facilitating on-site verification.

11. The instrument adopts an 8.4-inch large color LCD display, capacitive touch operation, and a Chinese character operation interface, making it easy and convenient to use.

12. The instrument can store 1000 sets of measurement data without loss, ensuring traceability for each measurement.

13. The instrument can upload test data to a PC via RS-232 interface (optional USB) and automatically generate a dedicated test data table. It is also possible to print on-site test data and historical storage data through the instrument's built-in micro printer.